Nikon 1 V2 Software and Firmware Download

Nikon 1 V2 Software and Firmware Download
Nikon 1 V2 Software and Firmware Download

More specifically, this version fixes the problem that eye-fi is stuck if a different button than the movie recording was used to stop the filming and upload it (wirelessly) from an eye-fi card.

When this problem occurs, first go to menu > Setup > firmware version and check the currently installed software to make sure it does not match any newer date or version.

If everything is OK, save and start the downloadable package (available for Windows and Mac OS platforms), format a compatible memory card with the camera's enclosure, and turn off the image processing device.

Then copy the file "V2_0121. Bin" from the newly created folder to the memory card, insert it into your camera and turn it on, go to the firmware version again and follow the instructions for a complete and successful Upgrade.

Finally, after the new firmware is installed, turn off the camera and remove the memory card (remember to reformat it). It would also be a good idea to check the currently installed version again to make sure that the process was successful.

Keep your digital system camera up to date. The firmware update for the "Nikon 1 V2" offered here for download brings the system camera up to date.

A firmware update can bring several advantages: First, the manufacturer thus improves errors that affect the function of the camera. Second, new features can be added through a firmware update. Third, the processing speed of the camera may benefit from the firmware update.

These improvements are offered by the 1.30 update

  • The update also makes continuous auto-focus mode AF-C possible using the bayonet adapter FT1 with AF-S lenses. However, the bayonet adapter must also be updated to firmware version 1.10.
  • The Nikon 1 Nikkor 32mm 1: 1.2 is now supported. In general, 1-NIKKOR lenses can now also be updated.
  • When you zoom in on images shot in MF (Manual Focus) focus mode, the 1 × magnification option has been added.
  • Continuous shooting with the FT1 bayonet adapter and an AF-S lens made the images darker than expected. This issue has been resolved.
  • The accuracy of the time synchronization with the GP-N100 GPS receiver attached to the camera and set the option "Set clock via GPS" to "Yes" has been improved.
  • The electronic viewfinder display in automatic mode and in the recording modes P, S, A, and M is now smoother.

These improvements are offered by the update 1.12

  • If you recorded slow-motion movies with a frame rate of 1200 / s, it could happen that single pictures were taken twice. The update fixes this problem.

These improvements are available in Update 1.11

  • In some cases, under-exposure was caused by the built-in flash. Nikon wants to have fixed this error with the update.

These improvements are offered by the update 1.10

  • The bayonet adapter FT1 is now supported. The adapter allows the use of NIKKOR Nikon F bayonet lenses with the system camera. Autofocus is available when using AF-S lenses. The focus mode must be set to AF-S (Single AF) and the AF area selector to Single field, with only the centre focus area can be used. The image stabilizer works when using appropriate lenses.
  • The "Pixel Mapping" option has been added to the system menu. Use this feature when a shot has unexpected light spots.

Note: The firmware update is at your own risk. If the update process is interrupted, the camera may be damaged. If you do not trust the update process, contact a photo retailer.

This is how the firmware update works

  • Download the update and unzip the file.
  • Make sure the camera battery is fully charged.
  • Insert a blank SD-HC card into the camera and format the card. This feature can be found in the camera menu. After that switch off the camera, remove the SD-HC card.
  • Insert the SD-HC card into the card reader of your computer. Copy the firmware file to the SD-HC card. Put the file in the main directory of the memory card, do not create folders. Finally, remove the SD-HC card using the Safely Remove Hardware feature. or? eject ??.
  • Insert the SD-HC card into the camera and then turn on the camera. In the Camera menu, locate the firmware update subpage. Confirm the update to the new version.
  • Switch off the camera after the update and after a few seconds again. Check the firmware version in the camera menu. Has the new version been installed?

Conclusion: To keep your Nikon 1 V2 always up to date and to ensure optimal performance of the device, update the firmware of the camera regularly. Larger software updates may even include new features for your camera.

Download Nikon 1 V2 Firmware for Windows Operating System:

Nikon 1 V2 Firmware Download for Windows 10
Nikon 1 V2 Firmware Download for Windows 8.1
Nikon 1 V2 Firmware Download for Windows 8
Nikon 1 V2 Firmware Download for Windows 7
Nikon 1 V2 Firmware Download for Windows XP
Nikon 1 V2 Firmware Download for Windows Vista

Download Nikon 1 V2 Firmware for Macintosh Operating System:

Nikon 1 V2 Firmware Download for Macintosh

0 Response to "Nikon 1 V2 Software and Firmware Download"

Post a Comment

Disclaimer: Images, articles or videos that exist on the web sometimes come from various sources of other media. Copyright is fully owned by the source.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel